Is Your Netgear Extender Not Connecting to Router? Let’s Fix!

Is Your Netgear Extender Not Connecting to Router? Let’s Fix!

7 September 2022

Many people have turned towards Netgear WiFi range extenders in order to gain access to a blazing-fast internet connection. After performing Nighthawk extender setup, the network of the router gets extended and reaches in every nook and cranny of the house. However, a number of users have not been able to take advantage of this because the extender sometimes refuses to connect to the router.

Are you experiencing the Netgear extender not connecting to the router issue? Well, know that your days of worrying are over. We can say this with surety because we have given the best troubleshooting hacks in this post that will definitely help you to rectify the issue at hand. Thus, stop waiting, and get down to reading.

[Fix] Netgear Extender Not Connecting to Router

  1. Restart Your Netgear Extender

This is the most basic thing that we recommend to users whenever they get stuck with the Netgear extender not connecting to the router issue. We would take this opportunity to advise you of the same thing. Who knows, it might work for you.

Fret not. Restarting your Netgear Nighthawk extender won’t consume much of your time. All you need to do is, unplug your extender from the wall outlet that you plugged it into, let it stay free for some time, and then, connect the extender back to its power outlet.

And you are done. Now, check if the Netgear extender not connecting to the router issue has bid farewell to you. If not, then, you need to move to the next troubleshooting hack.

  1. Check the Ethernet Cable Condition

Perhaps you used a damaged Ethernet cable to connect your networking devices, i.e. Netgear Nighthawk extender and home router. A damaged Ethernet cable can only work to an extent. Once its limit has been crossed, it stops giving you the expected result.

Therefore, it is recommended that you step out of your house and buy a new Ethernet cable. Once you are back home, connect your devices with the new cable. Make sure that the connection is finger-tight. Also, ensure that the Ethernet port is properly connected to the ports located on both your networking devices.

  1. Pull the WiFi Devices Closer

Once you are done ensuring a finger-tight connection between your networking devices check if they are placed in proximity. We are saying this because if the distance between them is too much, they won’t be able to communicate properly. If we talk in the technical sense, then your devices won’t be able to transmit signals with ease.

Therefore, take our advice and reduce the distance between the router and range device. But, see to it that they are not clinging to each other. Or else, their WiFi signals won’t exactly take your permission before colliding.

  1. Keep WiFi Interference at Bay

Have you not kept your Netgear Nighthawk extender at a location where it can breathe? As in, is the location of your extender also sharing space with smart home appliances? If yes, then worry not. We can help you to take care of the problem.

We suggest that you change the location of your wireless range extender. While doing so, keep in mind that none of the following appliances are kept near the extender:

  • Bluetooth speakers
  • Microwave ovens
  • Refrigerators
  • Cellular phones
  • Washing machines
  • Treadmills

Apart from these appliances, utensils containing a large amount of water should also be kept far from your Netgear Nighthawk extender.

  1. Perform Factory Default Reset

Despite all the efforts that you have made, are you still not able to troubleshoot the Netgear extender not connecting to the router issue? Well, in that case, only one hack can help you out, i.e. performing factory default reset.

Resetting your device means that it will get restored to its default mode. In order to execute this process, you need to take the help of the following steps:

  • Find and then press the Reset button located on the extender.
  • Hold on for as long as required.

Considering after resetting your device, it will go back to its default mode; you will have to set it up from scratch. You can do that using the Nighthawk app.

The Bottom Line

With the last hack, we are putting an end to our guide written on how can the Netgear Nighthawk extender not connect to the router issue can be fixed. With our fingers crossed, we hope that you will be able to get rid of the issue that you were facing.

Leave a Reply

Your email address will not be published.

InstaPro APK for Android Newest Version

IQ Test: All About the Intelligence Quotient and How to Raise It

How to Make Halloween Night Memorable With Scary Products?

Insta Pro Latest Version Apk Download [ Sam Mods ]

What is Instagram Pro APK ?

Latest Pinoy Teleserye | Pinoy Channel | Pinoy Lambingan Tv Shows

Watch biggBoss16 Online

Pinoy Teleserye Flix Replay

Pinoy Tambayan Tv

Watch My Asian Tv Online Here.